凯悌集团推出多媒体盒主、被动组件最佳解决方案

图片说明图片说明ALCOR Micro推出最佳之Flash CR Controller Advantages解决方案:
1.WW No. 1 flash card reader controller vendor today
2.Good tracking record both in USB1.1 and 2.0 generations
3.We know what our customers needed
a.Integrated 5V to 3.3V LDO to save BOM cost
b.Power saving mode
c.Flash card over current Protection
d.HID copy button
e.Tri-state bus design for other hosts to access the bus
f.Turbo USB driver ready
g.Selective suspend driver ready

AME(安茂微电子)推出最佳之LDO电源解决方案:

DC-DC BUCK Converter:
AME5248/5248A 1.5MHz, 600mA Synchronous Buck Converter

AME5248/5248A产品为600mA的脉波宽度调变/脉波频率调变同步降压直流-直流转换器(PWM/PFM Synchronous Buck DC-DC Converter),100%责任周期(Duty Cycle)提供低压降(Low Dropout)操作,最高效率可达95%。极低负载时,AME5248/5248A自动进入脉波频率调变(Pulse Frequency Modulation)以维持输出稳压,加上20μA的静态电流与Enable Function来支持省电模式,以上特性皆可延长可携式系统的电池运作寿命。固定1.5MHz的开关切换频率,可以在设计时使用较小型滤波组件,非常适合轻薄小巧的便携设备。

AME5248/5248A提供固定输出电压(1.0~3.3V)与可调式输出电压(AME5248为0.6V~VIN、AME5248A为0.5V~VIN)两种模式给客户选用。操作电压为2.5V~5.5V,操作温度为–40°C~125°C。

AME5248/5248A Simple Application Circuit:

DC-DC BUCK Converter:

AME5252 Dual Synchronous, 600mA, 1.5MHz Step-Down DC/DC Converter

AME5252产品为600mA的双输出同步切换降压直流-直流转换器(PWM Synchronous Buck DC-DC Converter),具备更高效能并节省电路板空间,固定1.5MHz的开关切换频率,可以在设计时使用较小型滤波组件,非常适合轻薄小巧的便携设备。2.5V至5.5V输入电压范围,适合使用于单一锂电池供电的应用上。AME5252操作在电流模式下,有100%责任周期(Duty Cycle)提供低压降(Low Dropout),其高效率可96%,可操作温为–40°C~125°C,并内建软开机功能。

AME5252 Simple Application Circuit

Low Dropout Voltage Regulator:
在PMP内部组件会运用到许多不同的LDO来供应所需的电压电流,对此AME许多的对应解决方案。AME8822提供固定电压1.2~3.3V、250mA电流输出、静态电流约为30uA、低噪声、高PSRR为65dB,并提供Enable Function,让客户有Power-Saving Mode的选择应用。AME8818有固定电压与可调式输出两种,输出范围为1.2~4.5V、300mA电流输出、PSRR约为60dB,并提供Enable & Bypass Function,让客户有Power-Saving Mode与低噪声的选择应用。AME8805提供固定电压1.3~5.0V、600mA电流输出、静态电流约为30uA。AME8815为输入2.7~7V、固定输出电压1.5~5.0V、1.5A电流输出、静态电流约为45uA.

AME8822 Simple Application Circuit:

AMOTECH 推出最佳之ESD / EMI全系列解决方案:
AMOTECH 推出最佳之ESD 全系列解决方案:
一、USB3.0,USB2.0 / eSATA2,eSATA3 / LAN / Antenna I/O AMOTECH ESD solution:
1、产品名称AIES12U 02 0R2
2、产品规格0402, Contact discharge 8KV, Air discharge 15KV, 0.2pF
3、产品特性ESD protection with very high speed interface.

二、HDMI AMOTECH ESD solution :
1、产品名称AIES 12U 02 0R2 /AMES 12U 04Q 0R2
2、产品规格0402, Contact discharge 8KV, Air discharge 15KV, 0.2pF
3、产品特性ESD protection with very high speed interface.

三、Digital Output AMOTECH ESD solution :
1、产品名称ADUC 10S 02 1R1 /AMES 12U 04Q 0R2
2、产品规格0402, Contact discharge 8KV, Air discharge 15KV, 1.1Pf
3、产品特性Ultra Low capacitance Chip Varistor .

四、A/V Output / TV,VCR(Scart) / RS232 AMOTECH ESD solution :
1、产品名称ADUC 30S 03 010
2、产品规格0603, Contact discharge 8KV, Air discharge 15KV, pF
3、产品特性Ultra Low capacitance Chip Varistor .

AMOTECH 推出最佳之EMI解决方案:

一、USB2.0 Amotech EMI solution (CMF)
1、产品名称ACFL 1A 2M 900E
2、产品规格0504
3、产品特性EMI solution for high speed differential transmission (Mbps)

二、USB3.0 / HDMI Amotech EMI solution (CMF)

1、产品名称ACFT 4A 2G 120E
2、产品规格0804,
3、产品特性EMI solution for high speed differential transmission (Gbps)

Amotech提供绝佳的静电保护措施,除了RGB / D-SUB的一般影像传输之外,在HDMI、USB 2.0、USB 3.0的部份亦提供包括Single type与Array type的对策,最高速度可支持到8G bps,并且不造成数据失真。
ASES12U020R2 1ch
ESD保护组件可用于高速传输的接口,如USB2.0, USB3.0, eSATA2, eSATA3, HDMI1.3 HDMI1.4等
AMES12U04Q0R2 4ch
ESD保护组件可用于高速传输的接口HDMI.

EUTECH (德信科技) 推出CD-DVD光盘播放刻录马达驱动器解决方案:

Nuvoton (新唐科技)推出个人媒体播放器最佳之解决方案:

新唐科技前身为华邦电子旗下之逻辑产品事业群,其辖下之系统芯片产品中心多年来致力于32位ARM SoC平台开发,目的在协助客户取得更齐全、更高功能、更低单价的32位平台,从不到一美元的超精简设计,到超高整合度的多功能平台,新唐科技已成功地完成13颗可用于各种应用的SoC芯片,成为华人地区最大以ARM为核心的SoC供货商。与新唐科技合作除了可以取得最高性价比的产品外,该团队坚强的研发与技术支持能力,也能成为客户在实际应用时最有力的后盾。

NUC501的推出,将针对较复杂的应用而设计,从计划到量产仅耗费了6个月时间。NUC501不同于一般微控制器带有嵌入式内存,新唐科技采用外接SPI Flash,而这样的设计可扩充内存,有别于之前业者宣称可达1美元价格的32位微控制器,内存仅8KB,读写容量太小,但NUC501采用SPI Flash既可达到扩充内存目的且花费成本也低,而这也是新唐科技近期重要的技术展现,客户用于PND GPS数据纪录,透过高容量的SPI Flash进行储存,SPI Flash可当数据及程序代码储存,节省客户端零件成本上的花费。

  • CPU:
    1、ARM7TDMI @ 81MHz
    2、32KB high-speed SRAM
    3、Extensible XIP @ SpiMemory
  • Technology & Package:
  • 0.18um CMOS, 2.8 ~ 3.3-volt single supply ,Power current
  • RoHS-compliant package: LQFP-48 (NUC501AN), LQFP-64 (NUC501BN)
  • Analog:
    1、8-ch 10-bit ADC
    2、16-bit Sigma-Delta mono DAC
    3、LVD / LVR / MIC
    4、1.8V LDO for VDD core
  • Peripherals:
    1、SPI x 2, I2Cx1, UART x 2 (TXD, RXD, CTS, RTS)
    2、24-bit WDT, 4-ch PWM output
    3、Capture & Compare PWM input x 8
    4、Up to 37 programmable I/O (LQFP-64)
    5、USB2.0 FS Device
    6、Data write-back & content download @ SpiFlash
    7、Embedded RTC with independent power
    8、Direct sink LED (16mA) x 8
    9、Crypto engine with OTP key for code security

    五、Operating current (All IP enable):

    1、24MHz: 10mA(1.8V)/2.3mA(3.3V)
    2、48MHz: 18mA(1.8V)/2.3mA(3.3V)
    3、72MHz: 23mA(1.8V)/2.3mA(3.3V)
    4、81MHz: 26mA(1.8V)/2.3mA(3.3V)

    六、Power down current:

    1、VDD33: around 0.5uA
    2、Core 1.8V: under 50Ua

    七、Development Environment:

    SiTime 推出SiT8103系列解决1-110MHz Oscillator 方案:

    Taitien泰艺电子推出SMD Crystal解决方案:

    TROQ(创捷电子)推出Crystal解决方案:

    ViKing推出电阻、电感之最佳解决方案:

    Winbond (华邦电子)推出Memory最佳之解决方案:
    Winbond Specialty DRAM Strategy

    Focus on Non-PC Main Memory

    _ Winbond runs “zero” PC main DRAM Biz with Winbond Branded products
    _ Over 75% of W/W DRAM demand is from PC main memory
    _ Long-term support with stable supply and the most advance technology
    _ Complete Specialty DRAM Solution Provider
    _ Density : 16~256M SDR, 64~256M DDR, 128M~1G DDR2
    _ Speed : Up to 200MHz for SDR, 250MHz for DDR1, 533MHz for DDR2
    _ I-temp Support with all 90nm SDR/DDR products
    _ x16 / x32 ; 1.8V support for SDR/DDR
    _ Support BGA (60/90/144 ball) Package
    _ Support KGD business with RDL solution
    _ (Many Successful Stories)
    _ To Expand Market Share of Specialty DRAM aggressively

    Winbond Flash Memory Strategy
    Winbond is well positioned for Serial Flash Market growth
    Primary focus and market advantage is Serial Flash
    Wide range of SpiFlash® Memories (1Mb to 128Mb)
    Superiorfeatures, Industry’s highest performance
    First to introduce Dual and Quad Serial Flash
    Complimentary Parallel Flash Memories
    Spansion compatible (16Mb to 32Mb)
    Strong Manufacturing Resources
    Competitive cost, new 90nm Technology
    In-house test, Known Good Die (KGD) capability
    Ample wafer capacity

    SpiFlash® W25Q Quad-SPI Family
    Next Generation Serial Flash
    Introduced in Aug 2007
    Worlds First Quad SPI Serial Flash
    25Q16 and 25Q32 in 130nm technology
    SPI, Dual-SPI and Quad-SPI
    Uniform 4KB, 32KB & 64KB erase
    Industry’s Highest Performance
    80MHz clock, 320MHz equiv. with Quad-SPI (40MB/S)
    >6X the performance of most Serial Flash,
    Execute code from SPI (XIP) or Faster Boot-up (Code Shadow)
    Security and other Features
    Lock-down & OTP write protect, 64-bit ID# (special order)
    Erase suspend/resume, Quad ProgrammingB

    New SpiFlash® W25Q “B” Series
    Winbond’s next generation SpiFlash family
    W25Q16B and W25Q64B are first in a family of 1M to 128M-bit
    Single, Dual and Quad SPI interface in one device
    Advanced 90nm Winbond Technology and Features
    First Serial Flash supplier with 90nm from 12” fab
    Packaging: First 64M-bit to fit in low-cost 8-pin SO package
    Performance: 104MHz Quad-SPI is industry highest
    Programming: 100% faster (reduces customer test time and application updates)
    Voltage Options: 3.3V, 2.5V and 1.8V operation
    New Features: Erase/Write-Suspend/Resume, OTP Security, Burst-with-Wrap
    Compatibility: Use for existing SPI, as well as new Dual and Quad SPI designs
    Page 17
    W19B Parallel Flash Family
    16Mb & 32Mb Densities
    2.7~3.6 Volt, x8/x16
    70 ns Access Time
    Single Bank Architecture
    Top or Bottom Boot Block
    48-Pin TSOP (12x20mm) Package
    Compatible with:
    Spansion-29 series
    MXIC-29 series
    STM-29 series
    Atmel-49 series
    SST-39 series